Sunday, June 02, 2019

Lessons learned

Driving down Bird I saw for sale what I thought was a great idea: modular garden fence panels. I pulled over to look. Put stakes in the ground and run them through screw-eyes in the ends of each panel. When you want to trim the weeds, or need access with a tiller, just lift the panel from the stakes and walk on in. I figured the price was too high, and made my own.

A pneumatic staple gun is great for attaching the screening. I got that one right the first time. (Lesson 0)

I tried using 2x4 for the frame--just once. I didn't want to waste the materials, or else that monstrosity would be long gone. Ever after I used 2x2, and when I couldn't find decent ones, split 2x4's on my table saw. (Lesson 1)

I used wall plates to assemble the frames. That was tedious, painful, and pricy. The next time I made panels I clamped the 2x2 together and bored holes for glued dowels. That was much cheaper, was about the same amount of effort, and seems to be just as robust--maybe a little more so. (Lesson 2)

Over time chicken-wire rusts rather badly, and results in unexpected personal perforations. Next time I'm using hardware cloth. It's more expensive and harder to work with, but looks more rugged. (Lesson 3). (For the garden door itself I had the wit to staple lath overlapping the edge of the chicken-wire so the ends don't bite.)

Round stakes wobble. You need to secure each panel to the next with cable ties. In fact, buying the steel rods may not have been entirely necessary, and later efforts just use cable ties and a few plastic garden rods. (Lesson 4)

Weeds will have their way. They penetrate black mulch, old rugs, and weave their way around pavers. Every year, pull out each panel and clean out the weeds and whatnot from the landing zone, and then reassemble the thing. Budget several hours. (Lesson 5)

Now I'm wondering what I'll learn next year.

UPDATE: I forgot lesson 6: A garden gate needs a sill!

No comments:

Post a Comment